MenuSearch | Country: United States | Currency: USD
Project S Silver Hybrid ATX Chassis
Discontinued
More variations available Show

Nanoxia Project S Silver Hybrid ATX Chassis

The Project S was developed for Computex 2016. It is Nanoxia’s first full-fledged HTPC / Tower case - with a special twist.

Features

  1. Sophisticated draw design
  2. Can be used as an HTPC or Tower chassis
  3. Can accommodates high end components
  4. Tempered glass side/top panel
  5. Lots of cooling/watercooling options

Nanoxia’s Project S high-end HTPC case provides sufficient space for ATX motherboards and standard ATX power supplies. The case can accommodate two 3.5” HDDs and three 2.5” SSDs. The 3.5” drives are installed in a special HDD holder, which can be removed to create space for a watercooling radiator or additional fans.

Project S in the tower position

Equipped with many practical features, such as fully modular HDD brackets, magnetic dust filters, a top made of scratch-resistant tempered glass and the opportunity to install a watercooling radiator. There is also another unique feature of the Project S - it can be used in upright position as a midi tower. By using highest quality materials it also ensures maximum stability for the Project S.


Sophisticated draw design

The absolute highlight of the Project S is certainly the sophisticated drawer design. The drawer can be easily pulled out for installation or maintenance of the system – even if the hardware is fully installed and the PC is switched on. The top is made out of tempered glass, which still allows an unobstructed view on the installed hardware. Since the tempered glass is scratch-resistant, a monitor can be placed on the top if desired.


Front panel design

The I/O-Panel can be found in the right corner of the front panel, which includes 2x 3.0 USB and 1x 3.1 Type C USB, as well as the mandatory audio jacks. The power, reset buttons and the LED on/off switch are located above the USB-ports. The noble and intentionally simple front design is highlighted again by an RGB LED strip, which decorates the lower part of the front. The RGB LED has a separate controller to customise the color. It is also possible to disable the LED at any time.


Cooling options

A 120mm fan from the CoolForce fan series is preinstalled in the back. Eight case fans can be mounted in total: Behind the front, two 120 or 140mm fans can be installed. In addition, there are mounting spaces for three 120mm fans on the right side and two 120mm fans on the left side at the expense of the HDD holder. To prohibit dust from entering the interior there are magnetic dust filters on both sides.


Watercooling options and compatibility

The Project S can be efficiently equipped with radiators or compact watercooling solutions. Not only behind the front panel, but also on both sides. A 240 or 280mm radiator or compact water cooling solution can be mounted behind the front. The right side panel takes in turn a 120 or 240mm radiator, and the left side allows the installation of a 120mm radiator. Finally the Project S can accommodate graphic cards with a length of up to 400mm and space for CPU coolers with a maximum height of 170mm.

More images

Reviews

  • bit-tech.net

    While the price may have seemed a bit expensive before you got to know the Project S, once we saw everything contained in this design, and knowing it is not cheap to retool a factory to price new components and designs, we feel that every penny of this asking price is justified. Nanoxia broke the trend of what we are used to seeing from them in the past and had no issues making one of the best HTPC cases we have ever seen.

  • bit-tech.net

    …the build quality is top-notch, the inclusion of a front USB 3.1 Type-C header is a nice touch and the case doesn’t put up too many obstacles to building a tidy and quiet system. It’s certainly not for everyone, but if you’ve got the cash to splash and are looking for a case that’s a little different, the Project S is well worthy of closer inspection.

SpecificationsProject S Silver
Manufacturer NumberNXPSS
Case TypeHTPC / Tower
Form FactorATX, Micro-ATX, Mini-ITX
2.5 inch drive bay internalmax. 5
3.5 inch drive bay internal2  *
Case Fan (Front)Space for 2x 120/140 mm
Case Fan (Rear)1x 120 mm (supplied)
Case Fan (Left side)Space for 2x 120 mm *
Case Fan (Right side)Space for 3x 120 mm
Height (Approx.)250 mm
Width (Approx.)490 mm
Depth (Approx.)460 mm
MaterialSteel, aluminium, tempered glass
Weight (Approx.)11.7 kg
Maximum installation height of CPU coolers170 mm
Maximum VGA Card Length400 mm
Warranty24 months
EAN barcode4260285294167
  • *Either 2x 120mm case fans, 2x 3.5” HDDs or watercooling radiator can be installed on the left of the case.
SpecificationsProject S Silver
Manufacturer NumberNXPSS
Case TypeHTPC / Tower
Form FactorATX, Micro-ATX, Mini-ITX
2.5 inch drive bay internalmax. 5
3.5 inch drive bay internal2  *
Case Fan (Front)Space for 2x 120/140 mm
Case Fan (Rear)1x 120 mm (supplied)
Case Fan (Left side)Space for 2x 120 mm *
Case Fan (Right side)Space for 3x 120 mm
Height (Approx.)250 mm
Width (Approx.)490 mm
Depth (Approx.)460 mm
MaterialSteel, aluminium, tempered glass
Weight (Approx.)11.7 kg
Maximum installation height of CPU coolers170 mm
Maximum VGA Card Length400 mm
Warranty24 months
EAN barcode4260285294167
  • *Either 2x 120mm case fans, 2x 3.5” HDDs or watercooling radiator can be installed on the left of the case.

Top Quiet PC Cases

Recently Viewed Products