MenuSearch | Country: United States | Currency: USD
ST-MH1 Short Heatpipes for FC8 Chassis $27.85
9 in stock
Add to Basket
(35 customer ratings / 1 review)
B-Grade ST-MH1 Short Heatpipes for FC8 Chassis $19.50
1 in stock ?
Add to Basket
More variations available Show

Streacom ST-MH1 Short Heatpipes for FC8 Chassis

The ST-MH1 improves compatibility with the Streacom’s FC8 chassis and motherboards that have their CPU socket closer to the side of the case.

Features

  1. Replacement mini heatpipes for the ones supplied with the FC8
  2. Can be used as general-purpose heatpipes for custom modding.
  3. Supplied as a kit of four heatpipes pre-formed into the correct shapes

Designed to replace the stock heatpipes supplied with the FC8, the MH1 kit contains a full set of mini heatpipes. These shorter heatpipes have been specifically designed to allow for motherboards with CPU socket locations that are positioned towards the right side of the motherboard (close to the heatsink side panel), greatly expanding the range of motherboards that are compatible with the FC8. For more information on the CPU socket coverage area and example motherboards, see Streacom’s system build guide.

SpecificationsST-MH1
Number of Heatpipes4
Heatpipe Diameter6mm
Heatpipe Length94mm
Compatible ChassisFC8 Evo
MaterialCopper
Warranty24 months
EAN barcode8718469090785
SpecificationsST-MH1
Number of Heatpipes4
Heatpipe Diameter6mm
Heatpipe Length94mm
Compatible ChassisFC8 Evo
MaterialCopper
Warranty24 months
EAN barcode8718469090785

Customer Reviews

Short Indeed

,

Streacom building guide says this kit is “Supplied as a kit of four heatpipes pre-formed into the correct shapes”. It is incorrect for the GA-H97N-WIFI motherboard, despite it is in the compatible motherboard list. The pipes hardly reach and surpass the middle of the CPU socket. They are short indeed. I had to reshape bending them to get 1 cm further into the CPU connector.

Quiet PC replied on 25th February 2015

Hi Victor

Many thanks for your review. You are indeed right they are seemingly short heatpipes. We also thought this when we first used them on the Sentinel Fanless system we have available. We thoroughly tested the heatpipe to see if the shortness would cause any issues and even though they do not fully extend across the whole of the CPU the cooling provided has no detriment to the performance of the short heatpipes. This is due to the fact that the base plate the heatpipe attach to on the CPU covers the whole of the processor which extracts the heat away and onto the heatpipes.

Product Resources

Top CPU Cooling Accessories

Recently Viewed Products