Country:Currency:
Site updated: 14.11.18

The item was dispatched very quickly

The item was dispatched very quickly, excellent packaging and great communication from beginning to end. (8th October 2018 via Trustpilot)
Master T3000 Touch Mid-Tower ATX Chassis
23 in stock
£58.27

Micronics Master T3000 Touch Mid-Tower ATX Chassis

Featuring innovative touch power/reset buttons and four 120mm white LED fans, the T3000 is an excellent choice if you are looking to show the internals of your PC.

The Master T3000 from Micronics is a great chassis for housing any PC, especially if you like to display the internal components of the PC. It features a tempered glass side front panel and an acrylic side panel, giving a clear and unobstructed view into the inside of the chassis. The four supplied white ring LED case fans not only help to cool the internal components but also illuminate them.

Features

  1. Innovative touch on/off and reset buttons
  2. Four pre-installed white ring LED fans with on/off fan switch
  3. Edge to edge acrylic side panel and tempered glass front
  4. Supports up to a total of five drive bays
  5. Supports 120/240/360mm liquid cooling radiators
  6. PSU shroud provides convenient and easy cable management

There is no doubt that it's possible to build an appealing PC in the T3000 but that's not the be-all and end-all of this chassis. It needs to be able to accommodate the high-end components it deserves. You needn't have worried as the chassis is able to hold up to five HDD/SSDs, a 120, 240 or 360mm water cooling radiator, CPU cooler with a maximum height of 160mm and finally graphics cards no longer than 410mm. It also features a PSU shroud which aids in covering up the sight of any unwanted cabling.

By default the chassis is supplied with four case fans (as shown above). It also has room for an additional four fans if required. Two can be installed on the PSU shroud, to bring in cooler air from the bottom of the chassis and a further two can be installed towards the top, which are designed to act as exhaust fans. As shown in the image below there are many air intake grills, allowing for cooler air to enter the chassis.

At the top of the chassis are the usual input/output ports. You'll find 2x USB2.0 and 2x USB3.0 ports, headphone and microphone ports and a fan switch. The fan switch allows for the fans to be turned on and off. When switch off the LEDs of the fans are also switched off. The fan switch can control up to four fans.

The final feature to mention is that the T3000 is not supplied with a conventional power on/off button or reset switch. In fact the chassis buttons are not buttons at all, they are touch sensitive pads at the front of the front glass panel. This is the first time we have seen this type of switch on any PC which adds to its unique style.


SpecificationsMaster T3000 Touch
Model NumberMaster T3000 Touch
Motherboard SupportATX, Micro-ATX and mini-ITX
Drive BaysEither 5x 2.5", or 3x 2.5" and 2x 3.5"
PSU SupportStandard ATX
PCI Slots7
Max VGA Card Length410mm
Max CPU Cooler Height160mm
Touch buttonsPower and reset at front of chassis
Water Cooling Radiator Support120, 240 or 360mm at front of chassis
External Ports2x USB2.0, 2x USB3.0, Headphone, Mic and Fan on/off Switch
MaterialsFront - tempered glass, Left side - acrylic window, Right side and chassis - steel
Cooling fansFront: 3x 120mm (supplied), Rear: 1x 120mm (supplied),
Top: 2x 120mm (not supplied), PSU shroud: 2x 120mm (not supplied)
Fan SpecificationsSpeed 1200(±10%) RPM, Hydraumatic bearings, Noise level 16dB(A), 53.0 CFM, White ring LED
Dimensions (H x W x D) 454 x 202 x 468
Warranty24 months
EAN barcode8809436062208

See Also

 

Our Address

Quiet PC Ltd
Brawby Grange
Brawby
Malton
YO17 6PZ
United Kingdom

Our Numbers

Useful Information

Keep In Touch

MasterCardMaestroPayPalAmerican ExpressVisaVisa Electron
30 day money back guarantee
2 year warranty

All prices exclude import tax. © 2000-2018 Quiet PC Ltd. If you have seen an error on this page, please let us know.