MenuSearch | Country: United States | Currency: USD
AFG120B Anti-vibration 120mm Fan Gasket $8.62
374 in stock
Add to Basket
(23 customer ratings / 4 reviews)
AFG92B Anti-vibration 92mm Fan Gasket $7.85
1,790 in stock
Add to Basket
(4 customer ratings)
AFG80B Anti-vibration 80mm Fan Gasket $7.52
1,521 in stock
Add to Basket
(17 customer ratings / 1 review)
More variations available Show

AcoustiFan Anti-vibration Soft Silicone Fan Gaskets

These ultra-soft fan gaskets are designed to reduce the vibration from cooling fans, and maintain a seal between the case side and the fan housing. Each retail pack contains an anti-vibration fan gasket with 4 silicone washers and screws.

We also stock these gaskets in packs of 32, please see: 32 Fan Gaskets OEM packs

Features

  1. Help to absorb the fan vibration
  2. Help to ‘seal’ the small gap between the fan and the casing/enclosure wall
  3. Compatible with virtually all case cooling fans
  4. Supplied with screws and silicone washers
  5. Quick and very easy to fit

These super-soft silicone fan gaskets are designed to dramatically reduce the vibration from any PC or server case cooling fans. The 60 and 70mm gaskets are 1.5mm thick, and the larger sizes are 2.5mm thick. Included with each gasket are silicone washers and anti-vibration screws. These screws feature a thread design which prevents the shank touching the fan and vibrations being transmitted and amplified through to the chassis.

These gaskets are suitable for the vast majority of case designs and fan combinations, as they fit standard fan mounting holes. Slightly lengthened (12mm thread) fan mounting screws are supplied with the fan gaskets and washers. These gaskets can be used with standard PC cooling fans, and not just with AcoustiFan™ quiet case fans. Note: Do not use these gaskets in very high temperature locations inside a PC/Server such as attached to CPU or GPU heat sinks!

Fitting instructions

  • Fit the fan gasket onto the outside of the fan housing (it will stay on the fan)
  • Position the fan and gasket together against the inside of the case, so that the four mounting holes in the fan and gasket line up to the mounting holes in the case side
  • Locate the four silicone washers and screws, and fit the washers against the case side, each secured by a screw
  • Tighten the screws enough to very slightly compress the silicone rubber. Do not overtighten.
Animation showing a vibration-reducing silicone fan gasket fitted to a standard case cooling fan, and fastened into position with a screw and external silicone washer.
Animation showing a vibration-reducing silicone fan gasket fitted to a standard case cooling fan, and fastened into position with a screw and external silicone washer.
Show specifications and reviews for:
SpecificationsAFG120BAFG92BAFG80B
Gasket Thickness2.5mm 2.5mm 2.5mm
Operating Temperature-20 to +70°C -20 to +70°C -20 to +70°C
SoftnessShore A 25 ± 5 Shore A 25 ± 5 Shore A 25 ± 5
MaterialBlack Silicone Rubber Black Silicone Rubber Black Silicone Rubber
Recommended Compression5% of height 5% of height 5% of height
Size120 x 120 mm 92 x 92 mm 80 x 80 mm
Warranty24 months 24 months 24 months
EAN barcode5060087740218 5060087740201 5060087740195
SpecificationsAFG120BAFG92BAFG80B
Gasket Thickness2.5mm
Operating Temperature-20 to +70°C
SoftnessShore A 25 ± 5
MaterialBlack Silicone Rubber
Recommended Compression5% of height
Size120 x 120 mm 92 x 92 mm 80 x 80 mm
Warranty24 months
EAN barcode5060087740218 5060087740201 5060087740195

Customer Reviews

AFG120B
AFG92B
AFG80B

Vibes

,

This item doesn’t do anything very complex in life, but it was easy to install and probably helps calm the case’s tendency to rattle. So, worth buying.

Very easy to install

,

Much easier to install than those rubber golf tee mounts. I recommend these are always used with fans to avoid case vibrations. They are a cheap add on and worthwhile as far as I can tell.

Fiddly

,

I fitted one of these to each of my new fans, they are fiddly to fit, they are thinner than they look, but when in place, seem to work well, I also used silicon mounts instead of metal screws, works well.

stop the judder

,

These work - they reduce the vibration on the fan through the chassis.

We haven't received any reviews of this product yet.

Does the job well.

,

Works well. You may need to make the holes in the case slightly bigger - don’t forget the screws shouldn’t touch the sides of the holes. And don’t overtighten!

Top Fan Accessories