Coolcube Aluminium Mini-ITX Cases

The Cooltek Coolcube is an elegant compact full aluminium chassis that has been designed to accommodate high-end components in a very small footprint.

The minimalistic Coolcube is completely made of 1.5mm thick anodised aluminium. The power button is centrally located at the bottom of the case. The Coolcube offers a classical, timeless design that blends in perfectly with any environment. The case is designed for a Mini-ITX motherboard and can be equipped with a standard ATX power supply. For users who want to install an SFX power supply, an adapter plate is included with our recommended SilverStone SST-ST30SF Semi-Fanless 300W PSU..

The case can accommodate either a 3.5” and a 2.5” hard disk or two 2.5” HDD/SSDs. The HDDs are installed on the floor of the case. If a 3.5” HDD is chosen it mounts using anti-vibration pads to help prevent any noise being transmitted on to the chassis. Two PCI expansion slots are available for the installation of a graphics card with a maximum length of 185mm. If a standard ATX power supply is installed then a CPU cooler with a maximum height of 80mm can be used. This measurement will increase if a smaller SFX PSU installed.

The cooling system of Coolcube is designed to minimise noise. For optimal system cooling the left side panel is perforated, allowing a continuous exchange of air for the CPU cooler. On the rear of the case up to four 40mm fans can be mounted (if required) to aid in case ventilation. The use of aluminium also contributes to improved heat dissipation.

Externally, two USB 3.0 ports are available, as well as the HD audio ports (mic and headphones). Appropriate hardware can therefore be connected quick and easy.

The case also features four refined aluminium “HiFi” case feet that effectively decouple the case thanks to a special rubber-dampening material on the bottom of each foot.