CNPS5100-CU Compact Flower for AMD/P4/Xeon Discontinued | |
More variations available Show |
Zalman CNPS5100-CU Compact Flower for AMD/P4/Xeon
Rather than using clips, this unique cooler is mounted using screws through holes in the motherboard, and this means that it is amazingly versatile. Not only is it compatible with socket 423 Pentium 4 processors, it also works with Xeon socket 603/604 and AMD socket 462/socket A! It features an ultra-quiet 60mm fan and is effective up to 3 GHz and above. It comes presented in a box containing the heatsink/fan, Fan Mate speed controller, thermal compound, screws/bolts/washers, bag of spare parts and instructions.
Because of its excellent cooling performance, and relatively small form factor, this cooler is recommended for multiprocessor machines. With minimal CPU socket overhang, it is very unlikely that there will be any clearance problems in mounting two or more of these coolers adjacent to each other.
The speed of the fan is controlled using a Fan Mate variable voltage regulator, so you can set this manually to the speed you require, for best balance between noise and CPU temperature. At its lowest speed setting, adequate cooling is achieved even for the fastest processors, and the fan is almost completely inaudible.
It is recommended that you try to keep your CPU temperature below 70-75°C for reliable operation, but there will be no problem achieving this with the CNPS5100-CU cooler. In practice, temperatures as low as 35-50°C are often achievable. Because of its design, the Flower will appeal to people who need a quiet computer, and also those who need minimum CPU temperature for best stability when overclocking, (please note that overclocking is done at your own risk).
IMPORTANT: To be able to successfully install this cooler, your motherboard needs to have four holes around the CPU socket as shown below. A S423 layout is pictured, but if the cooler is to be used with S603/604 Xeon or S462 AMD, similar holes must be present.
Features
- Best choice for P4 S423 and Xeon S603/604 up to 3.4 GHz
- Small footprint for multi-processor compatibility
- Requires four mounting holes around CPU socket for mounting
- Excellent cooling and quiet operation
- Screw-mount (very strong, but requires motherboard removal)
Specifications | CNPS5100-CU |
---|---|
CPU compatibility | Pentium 4 S423 / Xeon S603/604 / AMD S462 |
CPU supported clock speeds | 3.4 GHz Max |
Cooler dimensions | 90 (L) x 66 (W) x 70 (H) mm |
Base material | Pure Copper |
Cooler weight | 454g |
Surface area | 1500 sq cm |
Thermal resistance | 0.23 - 0.39°C/W * |
Fan dimensions | 60 x 60 x 25 mm |
Fan weight | 55g |
Rotational speed | 3000 - 5200 RPM * |
Acoustic noise level | 20.0 - 36.0 dBA * |
Fan bearing type | Vapo |
Fan Mate dimensions | 200 (L) x 21 (H) x 23 (W) mm |
Fan Mate weight | 20g |
Fan Mate output voltage | 5 - 11 VDC |
Fan Mate maximum fan wattage | 6 W |
- *variable depending on Fan Mate setting
Specifications | CNPS5100-CU |
---|---|
CPU compatibility | Pentium 4 S423 / Xeon S603/604 / AMD S462 |
CPU supported clock speeds | 3.4 GHz Max |
Cooler dimensions | 90 (L) x 66 (W) x 70 (H) mm |
Base material | Pure Copper |
Cooler weight | 454g |
Surface area | 1500 sq cm |
Thermal resistance | 0.23 - 0.39°C/W * |
Fan dimensions | 60 x 60 x 25 mm |
Fan weight | 55g |
Rotational speed | 3000 - 5200 RPM * |
Acoustic noise level | 20.0 - 36.0 dBA * |
Fan bearing type | Vapo |
Fan Mate dimensions | 200 (L) x 21 (H) x 23 (W) mm |
Fan Mate weight | 20g |
Fan Mate output voltage | 5 - 11 VDC |
Fan Mate maximum fan wattage | 6 W |
- *variable depending on Fan Mate setting