FERZAN UNLU - Posted: 2 Dec 2011 02:16
 (8/10)

My order received a little bit late. (came in 4 weeks, that's why I gave eight stars). I'm using with Sapphire HD4870 Vapor-X, the montage was not so hard. Instructions paper is enough to get how to setup. I've had a bit problem with my SATA connectors while setting up my motherboard's sata port location is too close to PCI-exp slot. (My board is gigabyte p45-ud3lr). I am using 2 HDDs and a dvd drive, my third sata port didn't let one of the fans spin therefore the dvd's sata cable is obliged to be removed. That's ok for now. Anyway, performance is amazing , it was around 65C when idle , and 85C+ when %100 load. After set it up , temperature has fallen down to 35C when idle and 46-50C when its full load.So that's an incredible cooler for your VGA Adapter, thanks to QuietPC. It's strongly advised. (Especially shopping from QuietPC).

Ash Michau - Posted: 17 Sep 2011 03:28
 (8/10)

Bought this for my HD6950 with bios mod to HD6970 and an overclock of 930/1400. Keeps it very very cool with MSI Afterburner giving a max reading of 52degrees at full load.

My only concern and annoyance, the fans are not PWM controlled so the fan speed cannot be changed through MSI Afterburner or other software. Sits on a constant 2100rpm which is actually louder than the stock cooler in my case. I bought this for the low noise element primarily and it was a little disappointing. Most of the reviews i read did not mention this factor. Tempted to look for another cooler or find a cheap fan controller.

Anonymous - Posted: 30 Jul 2011 21:41
 (10/10)

I bought this to replace the noisy stock cooler on my Radeon 6970 along with the extra VRM kit and it works brilliantly, keeps the card at 63 on the gpu and 70 on the VRM chips when overclocked to 950/1450 in Furmark at the highest settings.. It was a little bit tricky to install but worth it.. Definitely recommended!!

benjamin lee - Posted: 29 Mar 2011 20:08
 (9/10)

I'll start by saying excellent service you offer, super quick delivery. :D the item is very good, knocked down temps by 25c which I'm very happy, I can play Crysis 2 without overheating my card. wo0t but installation of cooler isn't as easy as I thought, the instructions are basic enough, but cards shown are the 275, not 9800gtx, although this cooler does support it, following diagrams that don't represent your card is a little hard. also the thermal pads are a nightmare to unstick from the corners (both side) overall excellent item.

Engin Günel - Posted: 16 Oct 2010 16:31
 (10/10)

First of all, I'd like to tell you this: I couldn't guess that the product would come to Turkey in a short time. I took the product in 4 working days. If we mention about the product, it is really excellent. I saw my Palit GTX 480 display adapter at idle the temperature of 32°C and at load the temperature of max. 60°C. My display adapter works quietly and stable as a result of Gelid Icy Vision and runs at approximately ((GPU clock-840MHz/ Shader clock-1680MHz/ Memory clock-1960MHz)).

THANKS QuietPC...!!!

Anonymous - Posted: 4 Aug 2010 19:50
 (9/10)

Was not sure about this cooler but once fitted well pleased with the result. Temp down from 60 to 34 degrees on idle and does not exceed 40 on full load. Not too difficult to fit but a bit of care needed when fitting thermal pads. Instructions straightforward. Much, much quieter than the noisy stock cooler on my PowerColor 4890 - all in all an excellent buy. Good service from Quiet PC too.

Anonymous - Posted: 28 Jul 2010 08:10
 (10/10)

Well I wasn't sure about this cooler but bought it after all coz 95C on my GTX470 just was insane... Had no clue how to install it as I never done it before but installed after all and now temps dropped for about 30C :P Really great cooler!