MenuSearch | Country: United States | Currency: USD
CS-80 Fanless ATX Computer Case
Discontinued
More variations available Show

Nofan CS-80 Fanless ATX Computer Case

This unusual PC chassis forms an excellent starting point for a good value fanless PC. Its hexagon mesh panels promote natural convection air flow and general build quality is excellent.

Features

  1. Highly specified aluminium case intended for fanless PC applications
  2. Compatible with full-size ATX motherboards
  3. Hexagon mesh panels promote natural convection air flow
  4. Offers 9 EZ-SWAP drive bays and screwless installation

Offering the possibility of using a full-size ATX motherboard for increased expansion, the CS-80 case is well ventilated and is ideal for anyone looking for a case that is suitable for a silent PC build using the Nofan CPU cooler.

Designed for the Nofan CPU Cooler

The Nofan CS-80 case is primarily designed with the Nofan CPU cooler in mind however the case cans be used with a convention CPU cooler if required.


Superb Ventilation

The CS-80 case is well ventilated both on top of the case, directly above the CPU area and also in the side of the case. This makes it ideal for use with a fanless CPU cooler like the Nofan where natural convection will ensure cooler air enters from the side and the warm air rises directly out the top of the case above the cooler.


Tool Free 3.5” Drive Bays

The five 3.5” internal drive bays have been designed so that they require no screws and so fitting a new drive or removing an old one is simple and easy.


EZ-Swap Function

There is no need to attach SATA and power cables for the first four 3.5” drives in the internal drive bays as Nofan use what they call EZ-SWAP. This means that the SATA and power leads to four of the five 3.5” drive bays are already in place at the rear of the drive bay making fitting a new drive easy with a minimum amount of fuss.


EZ-Swap Gate

A small, lockable panel on the side of the case provides quick, easy access for three 3.5” drives and this saves having to remove the whole side of the case just to fit or remove a drive.


Top Tray

A tray is provided on top of the case with easy access to two USB 3.0 ports making it an ideal place to charge your phone, MP3 player or attach an external hard drive knowing that they won’t accidentally fall or slide off the top of the case.


Please Note: The CS-80 case features integral motherboard stand-offs already pre-formed on the inside of the case and therefor the manual is incorrect in saying that the case is supplied with fifteen standoff’s. Only three are supplied and usually, even they are not required.

SpecificationsCS-80
Case modelNofan CS-80
Motherboard compatibilityFull ATX, Micro-ATX
Front ports2 x USB 2.0 and HD Audio
Top ports2 x USB 3.0
3½ & 2½ inch drive bays6 total (1 external / 5 internal)
5¼ inch drive bays3 external
Dimensions (W x D x H)200 x 490 x 470 mm
Maximum graphics card length290 mm
Warranty24 months
EAN barcode8809318200049
SpecificationsCS-80
Case modelNofan CS-80
Motherboard compatibilityFull ATX, Micro-ATX
Front ports2 x USB 2.0 and HD Audio
Top ports2 x USB 3.0
3½ & 2½ inch drive bays6 total (1 external / 5 internal)
5¼ inch drive bays3 external
Dimensions (W x D x H)200 x 490 x 470 mm
Maximum graphics card length290 mm
Warranty24 months
EAN barcode8809318200049

Customer Reviews

Great product!

,

After all these years using some sort of fans in PC parts I finally got tired even of small PC noises and bought this Nofan CS-80 case for my completely fanless PC setup and its perfect match with Nofan CR-95C fanless cooler, which I’m using in this case.

Fact, worth mentioning, is that this CS-80 case does have dual row of screw holes for PSU mounting, which is very important for some PSU’s (for example SeaSonic Platinum-400 Fanless power supply (SS-400FL2 Active PFC F3) does not have correct set of screw hole placement for mounting it right way, so this small detail in CS-80 case allows you to correctly mount that PSU!).

This CS-80 case comes with illuminated NoFan logo in front of case but luckily you can easily detach power connector from PSU and leave it not illuminated. I don’t know why almost all manufacturers are obsessed with adding more lights to their products, it’s just distracting/unneeded during PC use at night time. But as I mentioned, this is really optional in this case, you can just detach power cord from PSU to this illuminated logo and it won’t be a problem. What’s else worth mentioning is that disc activity and Power ON lights are not simple dot-type LED diodes like in some other cases but rather stylish “[” and “]” type light stripes, which look cool and luckily they are not too bright so it will not cause significant light emission when running PC in night time.

What I also liked in this case is the feature called “EZ-swap” (google it).

Nofan CS-80

,

Excellent, good looking case for no-fan / lo-fan applications. I needed to silence an early (135W) i7 based on a full ATX motherboard. This was recommended by QPC and it was a good choice. The SATA cables for the lower set of drive bays are perilously close to too short (I actually had to get them out and stretch them), but otherwise everything is fine and the components install easily.

Very satisfied

,

After some months of use, I can affirm that: It was very easy to mount my computer in this case thanks to its tool-free mechanisms, its design really provides a good temperature control, it’s highly expandable and I like the upper tray to charge my phone or other gadgets.

Product Resources

Top Quiet PC Cases

Recently Viewed Products