MenuSearch | Country: United States | Currency: USD
Excellent
3,222 reviews at Trustpilot.3,222 reviews

Ultra-Quiet 60mm Fans

In our experience, 60mm fans are generally found on low-cost or older processor coolers and produce reasonable airflow but are not usually very quiet. This size of fan is also commonly installed in home-cinema PC and small form-factor cases as a chassis fan because of the space restrictions therein. Whatever its purpose, if your PC has a 60mm fan which needs replacing or if you have space for a 60mm fan in your case, then this is the perfect fan for you.

Right at the top of the range of fan designs, this DustPROOF 60mm Acoustifan is the last word in quality and quietness. It has the longest expected lifespan we have ever seen, and is extremely resilient to high temperatures, making it ideal even for use with hot-running CPU heatsinks.

We must stress that if your processor fan is starting to wear out and you are thinking of replacing it, you would be best advised to replace the whole cooler (i.e. fan plus attached heatsink), not just the fan. We have plenty of coolers for this purpose. The reasoning behind this is that a low-efficiency heatsink coupled with a fan which could have a lower airflow figure than the one it replaces may produce an increase in CPU temperature. However, for customers who do not wish to remove or replace the whole cooler, this 60mm fan will be an excellent direct replacement for any existing 60mm fan.

To convert airflow in cubic feet per minute (CFM) to cubic metres per hour (m³/h), multiply the CFM figure by 1.7.

Sort by:
Only show:Products in stockSpecial offers

Acousti AcoustiFan: DustPROOF 60mm fan

262 in stock
AcoustiFan: DustPROOF 60mm fan
  • Virtually silent - designed to “BE QUIET AND STAY QUIET!"
  • Sealed motor prevents noise due to dust damage
  • Very high quality, extra-long life (over 6.5 years)
  • Includes free 3-speed fan cable and Ultra Soft Fan Mounts
  • 3 year manufacturer warranty
  • 25mm thick (1 inch)
More Details
$18.08
Add to Basket

Noctua NF-A6x25 FLX 12V 3000RPM 60x25mm Low Noise Fan

89 in stock
NF-A6x25 FLX 12V 3000RPM 60x25mm Low Noise Fan
  • 60 x 25mm quiet PC cooling fan
  • Noise level from 8.2 dB(A)
  • Feature packed
  • Six year manufacturer warranty
More Details
$14.10
Add to Basket

Noctua NF-A6x25 5V 3000RPM 60x25mm Low Noise Fan

16 in stock
NF-A6x25 5V 3000RPM 60x25mm Low Noise Fan
  • 60 x 25mm quiet 5V cooling fan
  • Noise level 19.3 dB(A)
  • Features OmniJoin Adaptor Set
  • Six year manufacturer warranty
More Details
$14.10
Add to Basket

Noctua NF-A6x25 PWM 5V 3000RPM 60x25mm Low Noise Fan

136 in stock
NF-A6x25 PWM 5V 3000RPM 60x25mm Low Noise Fan
  • 60 x 25mm quiet 5V PWM cooling fan
  • Noise level 19.3 dB(A)
  • Features OmniJoin Adaptor Set
  • Six year manufacturer warranty
More Details
$14.10
Add to Basket

Noctua NF-A6x25 PWM 12V 3000RPM 60x25mm Low Noise Fan

36 in stock
NF-A6x25 PWM 12V 3000RPM 60x25mm Low Noise Fan
  • 60 x 25mm quiet PC PWM cooling fan
  • Noise level 19.3 dB(A)
  • Features OmniJoin Adaptor Set
  • Six year manufacturer warranty
More Details
$13.00
Add to Basket

Nanoxia Deep Silence 60mm Ultra-Quiet PC Fan, 2000 RPM

40 due tomorrow, 23 pre-ordered
Deep Silence 60mm Ultra-Quiet PC Fan, 2000 RPM
  • Modern impeller design
  • Rifle bearing
  • 15.8 CFM, 12.1 dBA at 2000 RPM
More Details
$8.92
Add to Basket

Gelid Solutions Silent 6, 60mm Quiet Case Fan

444 in stock
Silent 6, 60mm Quiet Case Fan
  • Silent Operation
  • Optimised Fan Blades
  • High Airflow and High Static Pressure
  • Long Lifetime (50,000 h MTBF at 40°C)
  • 3 Years Warranty
More Details
$5.89
Add to Basket

FAQ

  • How do I measure fan size?

    The size of fan you need will generally be determined by the size of the fan fitting position in your PC case. The sizes of all the fans on our website are shown as measured along any one of the fan’s four sides, NOT the distance between the fan’s screw holes! Our most popular fan size is 120mm, followed by 80mm. This isn’t really dictated by customer preference, but more by recent designs of PC cases.

    As for the thickness (depth) of the fan, generally 25mm (1 inch) is by far the most common depth, although smaller fans can have shallower depths such as 15mm or even 10mm. All our fans are 25mm thick unless otherwise stated. If you have any questions about which fan you should order, please don’t hesitate to get in touch.

    If you know the distance between the fan mounting screw holes but don’t know what fan size to order, please see the following table. Note that the mounting hole measurements shown below are taken horizontally or vertically between the holes and not diagonally.

    Screw hole spacings and fan sizes

    32mm between screw holes:40mm fan size
    40mm between screw holes:50mm fan size
    50mm between screw holes:60mm fan size
    60mm between screw holes:70mm fan size
    72mm between screw holes:80mm fan size
    83mm between screw holes:92mm fan size
    105mm between screw holes:120mm fan size


  • I received a small cable (resistor) with my fan; what is it for?

    The resistor cable (also called Ultra Low Noise or ULN cable) is designed to allow the fan to run slightly slower for even quieter operation. The benefit in lower running noise is significant. Although the airflow will be reduced slightly, this usually has minimal effect on PC temperature. We would generally recommend using the ULN resistor cable for best results in almost all circumstances.

  • How can I tell which way the air blows through the fan?

    Hold the fan so that the round fan sticker is facing you. You are looking at the rear of the fan. When you plug the fan in, the air will be blowing towards you. If you want a fan to act as an air intake, then the fan sticker will be facing the inside of the case. Some fans also have two small arrows moulded into their plastic housing - one arrow shows the direction of airflow, and the other (at 90°) shows the direction of blade rotation.

  • Is it possible to use a 4-pin PWM fan or CPU cooler with a motherboard which has only 3-pin fan headers on it?

    Electrically, there is no problem doing this - the fourth pin on the fan cable is used purely for PWM control and is not needed in order for the fan to run. So you can plug the 4-pin fan connector onto the 3-pin motherboard fan header, leaving the fourth pin not connected to anything. The fan will potentially run at full speed, so if you would like to reduce the speed of the fan you will need to adjust the fan speed setting in your BIOS or use fan control software such as SpeedFan in Windows.

    The only other problem to consider is that occasionally, components immediately adjacent to the motherboard fan header can get in the way of the larger 4-pin fan connector, physically preventing connection. This problem also occurs if you try to use an in-line fan speed controller such as the one made by Gelid.

    Another avenue to explore is the possibility of using a bay-mounted fan controller. Several models are available now which provide 4-pin fan headers, so this is an easy way to use 4-pin PWM fans in a PC system which has only 3-pin fan headers on its motherboards. When using this method, you may find it necessary to disable any fan warning settings in your motherboard BIOS, since the motherboard may incorrectly believe that its CPU fan has failed when the fan is connected to a fan controller rather than directly to the motherboard itself.

“Excellent reliable service thanks”

“Excellent reliable service thanks”

13th May 2019 via Trustpilot