Shop by brand
- Acousti
- Nesteq
- AeroCool
- Nexus
- ArcSoft
- Noctua
- Arctic Cooling
- Nofan
- Arctic Silver
- Nubrit Axum
- Coolink
- PowerColor
- Corsair
- Quiet PC
- Crucial
- Rasurbo
- DeepCool
- Reeven
- Designcord
- Samsung
- Fansis
- Sapphire
- Fractal Design
- Scythe
- Gelid
- Sony
- Gigabyte
- StarTech
- GUP Japan
- Streacom
- Intel
- TBS
- Malwarebytes
- Thermolab
- mCubed
- Xilence
- Microsoft
- Zalman
- Moneual
- Zeno
- MSI
- Zotac
Shop by category
- Audio
- Monitors
- B-Grade
- Motherboards
- Cables
- New products
- Case accs
- Northbridge
- Cases
- Notebooks
- CPU & accs
- Power supply
- CPU coolers
- Rackmount
- Discontinued
- Software
- Fan accs
- Soundproofing
- Fans
- Special offers
- Gaming
- Systems
- HDD/SSD
- Ultra grade
- HTPC cases
- VGA coolers
- Keyboards/Mice
- Video cards
- Memory
- Watercooling
Recently viewed products
Zalman GS1000-Plus Gaming Case
- Replaces the Zalman GS1000-SE Special Edition Gaming Case- Replaced by the Zalman GS1200 Professional Full Tower Enclosure | GS1000-Plus Gaming Case [Discontinued] | £123.40 |
“Similar to GS1000-SE but with thicker side panels and extra HDD fans.”
Zalman's GS1000 Plus is a mid-range gaming case with features you would expect to find on high-grade cases. The case is fantastically good looking which represents great value for money. If you are looking for a new case for your next PC then the GS1000+ could have everything you need, if not more!
The GS1000 Plus is similar to the GS1000 Special Edition except it has slightly thicker side panels (1.2 mm), making it 2.4 kg heavier. Also it has two fans positioned in front of its hard drive bays, adding 5 mm to its depth and a little bit of extra running noise. The side panels on the PLUS version are made from aluminium rather than steel like the SE version.
Zalman GS1000 Plus Features
GS1000 Plus Airflow
Cooler air is drawn in from the bottom and front of the case. The first components to benefit from this cooler air is the hard drives which are installed at the front of the case. As the air heats up it is extracted through the top and rear. As shown in the image to the left.
GS1000 Plus Cabling System
To help reduce clutter and improve airflow the GS1000 has an excellent cabling system. Virtually all cables can be fed under the motherboard tray putting them out of sight. Airflow is increased due to the fact that there are less cables directly in the path of the airflow.
GS1000 Plus Hard Drive Installation and Cooling
The GS1000 PLUS has two chambers that can accommodate up to three 3½" hard drives each, six in total. Each hard drive is installed on a caddy which makes installing and removing the hard drive simple. These caddies also include rubber dampeners which help reduce hard drive vibrations. The hard drives installed into the bottom chamber are hot-swappable, thanks to the pre-installed ZM-HS1000. Finally, both chambers have a 80mm fan which quietly cools the installed hard drives.
GS1000 Plus USB, Firewire and Audio Ports
The input port cover on the top of the case is designed with extra durability for a smooth swivel mechanism. Once the cover has been opened there are two USB2, one Firewire, Microphone and Headphone ports for your convenience.
GS1000 Plus Water Cooling Holes
Water cooling is becoming more and more mainstream and with this in mind Zalman have provided two holes through the rear of the case for external water coolers, like the Reserator XT for example! Both holes have a rubber grommet that helps to protect the tubing from damage.
GS1000 Plus Top Cooling
On the ceiling of the case you will find one 120mm fan supplied with the case. There is also space for another 120mm fan to be installed. Installing a second fan will help increase the airflow through the case by extracting more warmer air.
GS1000 Plus Base Cooling
On the floor of the case you can install two 120mm fans. These fans increase the amount of cool air entering the system to help reduce the ambient temperature of the case and cool internal components.
GS1000 Plus PSU Installation
The power supply unit (PSU) is installed on rollers which makes the installation process very simple. The PSU is installed at the bottom of the case to benefit from the cooler air. This helps reduce the running temperature of the PSU and as a result noise levels are also reduced.
Features
- Great looking case representing excellent value
- Spacious motherboard accommodation - even supports E-ATX
- 6 x tool-free drive bays (3 bays hot-swappable)
- Roller-rail PSU mounting system
- Cable compartment for neat cable management
Specifications
| Enclosure Type | Full Tower |
| Dimensions | 260(W) x 570(H) x 640(D) mm (Feet included) |
| Weight | 13.5kg |
| Material | Aluminium / ABS / Steel |
| Motherboard Compatibility | E-ATX / Standard ATX / microATX |
| Power Supply Compatibility | Standard ATX / ATX12V |
| PCI/AGP Card Compatibility | Full Size |
| 5.25" Bays | x 4 (2 can serve as 3.5") |
| 3.5" Bays | x 6 (3 support Hot Swap, 3 are optional) |
| Cooling Components (Fans) | Top Vent: 120mm Fan Vent x 2 (1 Fan included, 1 optional), Front Vent: 92mm Fan Vent x 2 (2 Fans included), Rear Vent: 120mm Fan Vent x 1 (1 Fan included), Bottom Vent: 120mm Fan Vent x 2 (Fans optional) |
| Expansion Card Slots | 7 Slots (Tool Free Bolts provided) |
| Front I/O Ports | USB Port x 2, e-SATA Port x 1, Headphones x 1, Mic x 1 |
| Warranty | 24 months |
Customer Reviews
GS1000-Plus x
There are currently no reviews for this product.
See also:
