Zalman Heatpipe Cooled Modular PSUs

- Replaces the Zalman ATX Noiseless Power Supplies

	ZM1000-HP Dual Heatpipe Cooled 1000W Modular PSU [23 in stock, 80 due in 5 weeks] Review this product	€206,74 (€242,92 inc BTW)
	ZM850-HP Dual Heatpipe Cooled 850W Modular PSU [31 in stock, 100 due in 5 weeks] Review this product	€162,91 (€191,42 inc BTW)
	ZM750-HP Dual Heatpipe Cooled 750W Modular PSU [88 in stock, 90 due in 5 weeks] Review this product	€116,85 (€137,30 inc BTW)
	ZM600-HP Heatpipe Cooled 600W Modular PSU [133 in stock, 90 due in 5 weeks] Review this product	€89,86 (€105,59 inc BTW)
	ZM500-HP Heatpipe Cooled 500W Modular PSU [118 in stock, 60 due in 5 weeks] Review this product	€78,63 (€92,38 inc BTW)

Zalman heatpipe-cooled modular power supply

We are pleased to present Zalman's unique range of heatpipe-cooled power supplies. By using a heatpipe-based heatsink inside the PSU itself, Zalman have managed to give the product unparalleled cooling ability meaning that its fan can run reasonably quietly and the efficiency of the unit is very high (up to 86%!).

The units also feature a modular cable harness system. This allows you to remove those cables which aren't needed, improving the appearance, maintainability and airflow inside your PC case. The PSUs come with a generous 3-year warranty and the 500W and 600W units have a cool blue LED effect too. If you have been holding out for your next power supply upgrade, or wondering what PSU to use in your new dual-core system, now you have the answer!

If you are considering purchasing the ZM850-HP or ZM1000-HP, please ensure that you have sufficient space inside your case to accommodate its extra length. These units are 60 mm longer than a standard PSU.

ZM500-HP cable diagram - click to enlarge

ZM600-HP cable diagram - click to enlarge

ZM750-HP cable diagram - click to enlarge

ZM850-HP/1000-HP diagram - click to enlarge

ZM850-HP & ZM1000-HP cable diagram - click to enlarge

Specifications

	ZM1000-HP	ZM500-HP	ZM600-HP	ZM750-HP	ZM850-HP
+3.3V max load	40 A	24 A		30 A	25 A
+5V max load	40 A	24 A		30 A
+12V1 max load	18 A	25 A	16 A	20 A	18 A
+12V2 max load	18 A		16 A	20 A	18 A
+12V3 max load	28 A	-	16 A	20 A
+12V4 max load	28 A	-	16 A	20 A
+12V5 max load	18 A	-			18 A
+12V6 max load	18 A	-			18 A
Combined maximum output +3.3V / +5V	250 W	140 W	155 W	160 W	191 W
-12V max load	0.8A	0.5A		0.8A
+5VSB maximum standby current	3.5 A	2.5 A			3.5 A
Power conversion efficiency	86% max	81% max	84% max	86% max
LED light	None	Blue		None
Heatpipe system	Dual	Single		Dual
Number of hard drive connectors	10	7		9	10
SATA connectors	12	6		9	12
Number of floppy drive connectors	2
Length, mm	210	165			210
Width x Height, mm	150 x 86
Master power on/off switch	No	Yes			No
Standby noise filter switch	Yes	No			Yes
Noise output	18-31db(A)
ATX12V version	2.2
ATX12V (4-pin) support	Yes
EPS12V (8-pin) support	Yes
20-pin ATX connector	Yes
24-pin ATX connector	Yes
PCI-E support	Two 6-pin and two 8/6-pin	Two 6-pin	One 6-pin and one 6/8-pin		Two 6-pin and two 8/6-pin
Mains input voltage	100-240 VAC, 47-63 Hz
Fan speed control	Thermal
Dual-core supported	Yes
Over voltage protection	Yes, on all outputs
Short circuit protection	Yes, on all outputs
EMC, safety approvals	CE, CB, RU, MIC
Monitor pass-through power socket	No
Mains input voltage selection	Auto-range
Length of motherboard power cable	55 cm (approx)
Warranty	36 months