MenuSearch | Country: United States | Currency: USD
Ninja-PLUS Rev B Heatpipe Cooler, with 120mm fan
Discontinued
More variations available Show

Scythe Ninja-PLUS Rev B Heatpipe Cooler, with 120mm fan Ultra

One thing we like about Scythe’s CPU coolers is that their product names always bring a smile to our face. Their latest fanless cooler is no exception: the Ninja! This product is not especially good at being an agent of espionage or assassination, but it does excel in one area of specialism - it provides cutting-edge cooling performance!

The Ninja represents the holy grail of a quiet computer because it can be an entirely passive heatsink, so from a noise point of view it is totally silent. It manages this through its clever arrangement of a multiple-layer fin design, combined with no less than six heatpipes. Because of this, it is one of the most efficient heatsinks we sell. The downside of this design is that is makes the heatsink fairly large, meaning that it is unsuitable for use in restricted-space applications such as HTPC cases.

Scythe Ninja-PLUS Rev B Heatpipe CPU Cooler
Scythe Ninja-PLUS Rev B Heatpipe CPU Cooler

As with all fanless coolers, use of the Ninja is restricted by the type of CPU you are intending to use with it. We recommend using this cooler fanless if your CPU is a Pentium 4 Northwood (any speed), or an Athlon 64 3500+ or lower. If you intend to use the cooler with a socket 775 processor or a CPU faster than an Athlon 64 3500+ then we recommend you install the supplied 120mm fan. The Ninja-PLUS is supplied with two retaining clips and a 120mm fan for use with a high-end CPU, like Intel’s and AMD’s new dual core processors.

It is imperative that after installation you monitor your CPU temperature very closely, making sure that you are happy with the results. If you believe your CPU temperature is too high (say 70C or above), try to increase the airflow through the system. If the CPU temperature is still too high then please cease using the Ninja and contact us for advice. However, as long as you do not run your PC with the CPU flat out for many hours continuously, there should be no reason why you can’t enjoy the silence of this cooler.

Alternatively you can always use the supplied 120mm fan to provide direct airflow to the heatsink; And if you purchase Zalman’s Fanmate 2 at the same time you will be able to adjust the speed of the fan to give you the best balance between noise and cooling.

Features

  1. Socket 478, LGA775, AM2, 754, 939, 940 and AM2 compatible
  2. Utilises six “U-shaped” heatpipes
  3. Dual/Quad Core ready
  4. Supports fanless mode
  5. Supplied with 120mm fan for ultimate performance
  6. Does not require motherboard removal for installation
SpecificationsNinja-PLUS
CPU CompatibilitySocket 478, LGA775, 754, 939 and 940 and AM2  *
CPU supported clock speedsAll low to medium loaded CPUs (without fan), all speeds with optional 120mm fan
Heatsink dimensions, mm110(L) x 110(W) x 150mm(H)
MaterialsAluminium
Weight640g (excluding fan)
Acoustic noise level of 120mm fan24 dBA
Air Flow68.5 CFM
Fan RPM1200
  • *Customers who intend to use the Ninja with a Pentium 4 LGA775 CPU or a Athlon 64 939 over 3500+, are recommend to use an optional 120mm fan.
SpecificationsNinja-PLUS
CPU CompatibilitySocket 478, LGA775, 754, 939 and 940 and AM2  *
CPU supported clock speedsAll low to medium loaded CPUs (without fan), all speeds with optional 120mm fan
Heatsink dimensions, mm110(L) x 110(W) x 150mm(H)
MaterialsAluminium
Weight640g (excluding fan)
Acoustic noise level of 120mm fan24 dBA
Air Flow68.5 CFM
Fan RPM1200
  • *Customers who intend to use the Ninja with a Pentium 4 LGA775 CPU or a Athlon 64 939 over 3500+, are recommend to use an optional 120mm fan.

Top Ultra Grade Products

Recently Viewed Products