MenuSearch | Country: United States | Currency: USD
Accelero Xtreme Plus GPU Cooler
Discontinued
More variations available Show

Arctic Cooling Accelero Xtreme Plus GPU Cooler

The Accelero Xtreme Plus is a powerful cooling solution for high end VGA boards from ATI and nVIDIA. Featuring different accessory sets with various mounting plates, the cooler fits a wide range of high end VGA boards.

Efficient cooling

Featuring five heatpipes and 84 fins, topped with triple 92mm fans, the Accelero Xtreme Plus has an unmatched cooling performance of 250 watts. This provides incredible cooling performance and dramatically lowers the card’s temperature. A lower card temperature will increase the product’s life span and opens up room for overclocking.

Incredibly Quiet

With three PWM-controlled 92 mm fans, the Accelero Xtreme Plus cools extremely efficiently, and yet it is almost inaudible. Thanks to the PWM control, the rate at which the fan spins depends on the load generated by the GPU. This means that the fan just speeds up if necessary and will slow down when the GPU is not under load. Of course the PWM settings can be modified to get the maximum performance if desired.

Wide compatibility

The Accelero Xtreme Plus must be combined with an additional set of heatsinks (not supplied) and a mounting plate. With currently five different accessory sets, the cooler offers compatibility with a number of high end VGA boards. This modular design makes it possible to use the cooler on future graphics cards. To purchase these heatsinks please visit this page and choose the heatsinks for your graphics card.

Features

  1. Excellent cooling performance - 250 Watts
  2. Three ultra quiet 92mm PWM fans with low noise impeller
  3. Five heatpipes and 83 fins for efficient heat dissipation
  4. Patented fan holder eliminates the buzzing sounds
  5. Requires RAM/FET heatsink, available separately
SpecificationsAccelero Xtreme Plus
nVidia CompatibilityGTX580, GTX570, GTX480, GTX470, GTX465, GTX460, GTX285, GTX280, GTX275, GTX260+, GTX260, GTS250, 9800GTX+, 9800GTX
ATI CompatibilityHD6970, HD6870, HD5870, HD5850, HD5830, HD4890, HD4870, HD4850, HD4830, HD3870, HD3850
Dimensions290 L x 104 W x 56 H mm
Fans92mm x 3 fans
Cooling Capacity (Watts)250
Rated Fan Speed900 - 2000 RPM, (PWM)
Noise Level (Sone)0.5
BearingFluid Dynamic Bearing
Airflow81 CFM / 138 m³/h
Warranty72 months
EAN barcode0872767002586
SpecificationsAccelero Xtreme Plus
nVidia CompatibilityGTX580, GTX570, GTX480, GTX470, GTX465, GTX460, GTX285, GTX280, GTX275, GTX260+, GTX260, GTS250, 9800GTX+, 9800GTX
ATI CompatibilityHD6970, HD6870, HD5870, HD5850, HD5830, HD4890, HD4870, HD4850, HD4830, HD3870, HD3850
Dimensions290 L x 104 W x 56 H mm
Fans92mm x 3 fans
Cooling Capacity (Watts)250
Rated Fan Speed900 - 2000 RPM, (PWM)
Noise Level (Sone)0.5
BearingFluid Dynamic Bearing
Airflow81 CFM / 138 m³/h
Warranty72 months
EAN barcode0872767002586

Customer Reviews

Amazing difference !

,

I have an EVGA 460 GTX SC and whilst being a terrific card does get rather noisy with the stock fan fitted, so I ordered one of these, fitting took about an hour and a half the results are spectacular to say the least, I ran furmark for 10 minutes and the temperature never got over 62 degrees and the fan got to 45%. Impressive start, but it’s gaming that’s more important to me so I fired up World of Tanks (a game I play a lot), I used to have the settings on minimum as the stock fan makes such an awful racket I can still hear it even when wearing headphones, the difference was amazing, fan speed never goes above 30% so it’s virtually inaudible and the temperature remains at least 15 degrees lower than with stock cooler plus everything’s maxed now.

Bear in mind you have to order the fitting kit from Hong Kong as the glue used to fit the heatsinks on the VRM’s has a short shelf life.

If your on air fit 1 of these you won’t be sorry.

Great next day service by QPC and a top product.

Product Resources

Recently Viewed Products