Kaze Master Ace Black 5.25inch Fan Controller Discontinued | |
More variations available Show |
Scythe Kaze Master Ace Black 5.25inch Fan Controller
The Kaze Master Ace is an updated version of the Kaze Master. The only difference is the fact that Ace version has an aluminium front bezel to further increase the good looks of this already good looking product!
Kaze Master ACE 5.25 inch fan controller
Just like the original Kaze Master the Ace version shows the RPM of each connected fan and the temperature of the four supplied probes. One thing we are often asked about the fan controllers we sell, is whether they can switch the fan(s) off when their dials are turned down to the minimum setting. The Kaze Master Ace can! So if you only want a fan to run under certain circumstances then this could be your ideal fan controller.
As already mentioned, each fan controller is supplied with four temperature probes. These probes connect to the rear of the fan controller and are then placed inside the PC. The best locations to place these probes depends on which component(s) you wish to monitor. The most common choices are the CPU and the graphics card, so by slotting the probe between the heatsink fins you are then able to monitor how hot the heatsink runs.
Review
Custom PC Magazine
The Kaze Master Ace 5.25in looks great, with a black, brushed aluminium fascia, embedded display and four responsive dials edged in chrome. Sleek and easy to use. Overall: 85%, Premium Grade Award.
Specifications | KM ACE 5.25 BL |
---|---|
Model No. | KM02-BL |
Measurements (W x H x D) | 148.5 x 42.5 x 63 mm |
Display Measurements (W x H) | 114 x 20 mm |
DC Input | 5V or 12V (from PSU) |
Fan Adjustment Range | 3.7 V (±10%) ~ 12 V (±10%) |
Fan Channels | Four |
Maximum Ampere per Channel | 1 Amp |
Fan Speed Range | 0 ~ 9990 RPM (displayed in 30 RPM steps) |
Number of Temperature Sensors | Four |
Temperature Range | 0 ~ 100°C / 32 ~ 199.9°F |
Measurement Frequency | 2 Seconds |
Weight | 165g |
EAN barcode | 4571225043173 |
Specifications | KM ACE 5.25 BL |
---|---|
Model No. | KM02-BL |
Measurements (W x H x D) | 148.5 x 42.5 x 63 mm |
Display Measurements (W x H) | 114 x 20 mm |
DC Input | 5V or 12V (from PSU) |
Fan Adjustment Range | 3.7 V (±10%) ~ 12 V (±10%) |
Fan Channels | Four |
Maximum Ampere per Channel | 1 Amp |
Fan Speed Range | 0 ~ 9990 RPM (displayed in 30 RPM steps) |
Number of Temperature Sensors | Four |
Temperature Range | 0 ~ 100°C / 32 ~ 199.9°F |
Measurement Frequency | 2 Seconds |
Weight | 165g |
EAN barcode | 4571225043173 |
Customer Reviews
OMG what a difference!
Just received this controller today, and what can I say…
Taking it out the box you can see the build quality is top notch and the alu bezel matches in with the Lian Li range of cases.
This has allowed me to control the noise that the 2 x Kaze Ultra 3000 on my TRUE and 2 x Kaze Ultra 2000 on the cases were producing without sacrificing cooling performance.
As a folder I can keep my i7 at 4GHz and have the CPU fans spin at 2370rpm whilst the temps don’t go above 62 degrees.
With the PC in the bedroom this means I can keep it cool and quiet whilst trying to sleep and then turn them back up full before going to work/out.
The rpm is on green whilst the temps on the display are in blue, weird combo but doesn’t look out of place at all.
I have never ordered from QuietPC before but their email notifications on shipping/tracking and the excellent service means I will be coming back.
Bottom line… Don’t hesitate to buy this controller.
See Also
Product Resources
Top Case Accessories
Acousti AcoustiFeet Soft Anti-Vibration Feet ACF3007-20B
Acousti AcoustiFeet Firm Anti-Vibration Feet ACF3007-30B
Quiet PC SupaHub PCIe to 4x Type A and 1x Type C USB Card
Noctua NA-FH1 8 Channel PWM Fan Hub
FLIRC USB (version 2) - Use any Remote with your Media Center
Gelid PCI Slot Fan Holder with two slim 120mm UV Blue Fans
Streacom ST-LH6 Additional CPU Cooling Kit for DB4
Streacom Type-C USB 3.1Gen2 Cable for DA2 Chassis
Streacom Front I/O Type-A USB Module, Black, ST-DX2-FIOA-400B
Streacom Fanless GPU Cooler for ST-DB4 Chassis