Kaze Master Ace Black 3.5inch Fan Controller Discontinued | |
Kaze Master Ace Silver 3.5inch Fan Controller Discontinued | |
More variations available Show |
Scythe Kaze Master ACE Fan Controllers
The aluminium version of the Kaze Master is here: ACE!
The Kaze Master Ace is an updated version of the Kaze Master. The only difference is the fact that Ace version has an aluminium front bezel to further increase the good looks of this already good looking product!
Kaze Master ACE 5.25inch fan controllers
Just like the original Kaze Master the Ace version shows the RPM of each connected fan and the temperature of the four supplied probes. One thing we are often asked about the fan controllers we sell, is whether they can switch the fan(s) off when their dials are turned down to the minimum setting. The Kaze Master Ace can! So if you only want a fan to run under certain circumstances then this could be your ideal fan controller.
As already mentioned, each fan controller is supplied with four temperature probes. These probes connect to the rear of the fan controller and are then placed inside the PC. The best locations to place these probes depends on which component(s) you wish to monitor. The most common choices are the CPU and the graphics card, so by slotting the probe between the heatsink fins you are then able to monitor how hot the heatsink runs.
Specifications | KM ACE 3.5 BL | KM ACE 3.5 SL |
---|---|---|
Model No. | KM02-BL-3.5 | KM02-SL-3.5 |
Measurements (W x H x D) | 102 x 25 x 93 mm | 102 x 25 x 93 mm |
Display Measurements (W x H) | 60 x 15.5 mm | 60 x 15.5 mm |
DC Input | 5V or 12V (from PSU) | 5V or 12V (from PSU) |
Fan Adjustment Range | 3.7 V (±10%) ~ 12 V (±10%) | 3.7 V (±10%) ~ 12 V (±10%) |
Fan Channels | Two | Two |
Maximum Ampere per Channel | 1 Amp | 1 Amp |
Fan Speed Range | 0 ~ 9990 RPM (displayed in 30 RPM steps) | 0 ~ 9990 RPM (displayed in 30 RPM steps) |
Number of Temperature Sensors | Two | Two |
Temperature Range | 0 ~ 100°C / 32 ~ 199.9°F | 0 ~ 100°C / 32 ~ 199.9°F |
Measurement Frequency | 2 Seconds | 2 Seconds |
Weight | 165g | 165g |
Warranty | 24 months |
Specifications | KM ACE 3.5 BL | KM ACE 3.5 SL |
---|---|---|
Model No. | KM02-BL-3.5 | KM02-SL-3.5 |
Measurements (W x H x D) | 102 x 25 x 93 mm | |
Display Measurements (W x H) | 60 x 15.5 mm | |
DC Input | 5V or 12V (from PSU) | |
Fan Adjustment Range | 3.7 V (±10%) ~ 12 V (±10%) | |
Fan Channels | Two | |
Maximum Ampere per Channel | 1 Amp | |
Fan Speed Range | 0 ~ 9990 RPM (displayed in 30 RPM steps) | |
Number of Temperature Sensors | Two | |
Temperature Range | 0 ~ 100°C / 32 ~ 199.9°F | |
Measurement Frequency | 2 Seconds | |
Weight | 165g | |
Warranty | 24 months |
See Also
Product Resources
Top Case Accessories
Acousti AcoustiFeet Soft Anti-Vibration Feet ACF3007-20B
Acousti AcoustiFeet Firm Anti-Vibration Feet ACF3007-30B
Quiet PC SupaHub PCIe to 4x Type A and 1x Type C USB Card
FLIRC USB (version 2) - Use any Remote with your Media Center
Noctua NA-FH1 8 Channel PWM Fan Hub
Streacom ST-LH6 Additional CPU Cooling Kit for DB4
Gelid PCI Slot Fan Holder with two slim 120mm UV Blue Fans
Streacom ST-DB4ODD DB4 Optical Drive Kit
Streacom Type-C USB 3.1Gen2 Cable for DA2 Chassis
Streacom Front I/O Type-A USB Module, Black, ST-DX2-FIOA-400B