Fan Accessories

|
Price: £29.78 (£34.99 inc. VAT)
- Extra-soft black silicone gives optimal fan noise reduction
- Compatible with all fans with standard mounting holes
- Easy to fit and remove - no case modifications required
- Excellent value for money and long-lasting (durable and tearproof)
More information
|
| |
1000 due in 20 days |
|

|
Price: £29.78 (£34.99 inc. VAT)
- Extra-soft black silicone gives optimal fan noise reduction
- Compatible with all fans with standard mounting holes
- Easy to fit and remove - no case modifications required
- Excellent value for money and long-lasting (durable and tearproof)
More information
|
| |
1000 due in 20 days |
|

|
Price: £28.69 (£33.71 inc. VAT)
- Aluminium update to the standard Kaze Master
- Fits into a 5¼" drive bay
- Manual fan speed controller with temperature sensors
- Controls up to four fans
- Fail safe alarm - alarm sounds if fan fails
- Able to completely stop the fan, if desired
More information
|
| |
40 in stock |
|

|
Price: £28.08 (£32.99 inc. VAT)
- Controls up to five fans
- One PWM fan and four standard fans
- Elegant, black aluminium finish
- Supplied with fan extension cables
More information
|
| |
183 in stock |
|

|
Price: £25.52 (£29.99 inc. VAT)
- Separate control of 2 fan channels
- 50W per channel with PWM, combined 100W
- 20W per channel with analogue, combined 25W
- 2 analogue sensors
- Kick-start for water pumps
- Configuration with jumpers and potentiometers
- Free configuration with T-Balancer and its software
- Integrated overheat protection in analogue operation
More information
|
| |
5 in stock |
|

|
Price: £24.34 (£28.60 inc. VAT)
- Available with black or silver aluminium front bezel
- Controls up to eight fans simultaneously
- Easy setup with two separate "Cooling Zones"
- Blue LEDs indicate the on/off state of each "Cooling Zone"
- Each "Cooling Zone" can be turned on or off independently
- Precise 6 to 12 volt adjustment range for each connected fan
- Compatible with 3-pin (standard) or 4-pin (PWM) fans
More information
|
| |
13 in stock |
|

|
Price: £20.42 (£23.99 inc. VAT)
- Six Channel Multi Fan Controller
- Comprehensive Control of Cooling Performance and Noise
- Aluminium Front Panel for Maximum Aesthetic Quality
- Fast and Easy Access to Fan RPM Control
- Colour and Intensity Variable LEDs for Simple Monitoring of Fan Speed
More information
|
| |
104 in stock |
|

|
Price: £14.77 (£17.35 inc. VAT)
- Provide extra cooling from a PCI slot
- Flexible fan mounting opportunities
- Even compatible with 2.5" HDD/SSDs
- Very quiet, from 19.5 dBA
More information
|
| |
19 in stock |
|

|
Price: £10.43 (£12.26 inc. VAT)
- Convenient reusable box contains five compartments
- 4 x rubber case feet to reduce overall vibration
- 24 x rubber fan mounts eliminate fan vibration for up to six fans
- 12 x HDD metal screws with rubber grommets for HDD mounting
- 20 x black cable ties to help reduce the clutter inside the PC
More information
|
| |
18 in stock |
|

|
Price: £8.69 (£10.21 inc. VAT)
- High precision polyester mesh prevents dust build-up inside your PC case
- Keeps your PC clean and improves reliability
- All filters can be cleaned easily
- Attaches to your PC case using magnets, no fans necessary
- If the case is non-steel, adhesive frames are available separately
More information
|
| |
43 in stock |
|

|
Price: £8.50 (£9.99 inc. VAT)
- Controls a PWM fan
- Automatic or manual control
- Each to install
More information
|
| |
142 in stock |
|

|
Price: £7.82 (£9.19 inc. VAT)
- High precision polyester mesh prevents dust build-up inside your PC case
- Keeps your PC clean and improves reliability
- All filters can be cleaned easily
- Attaches to your PC case using magnets, no fans necessary
- If the case is non-steel, adhesive frames are available separately
More information
|
| |
271 in stock |
|

|
Price: £6.08 (£7.14 inc. VAT)
- Powerful PC dust and grime remover
- Instantly and safely cleans PC internals and circuit boards
- Can improve reliability and ease of maintenance
- Large long-lasting 400ml can
- 100% ozone-friendly
More information
|
| |
43 in stock |
|

|
Price: £5.21 (£6.12 inc. VAT)
- High precision polyester mesh prevents dust build-up inside your PC case
- Keeps your PC clean and improves reliability
- All filters can be cleaned easily
- Attaches to your PC case using magnets, no fans necessary
- If the case is non-steel, adhesive frames are available separately
More information
|
| |
41 in stock |
|

|
Price: £5.09 (£5.98 inc. VAT)
- Extremely effective for preventing dust buildup inside your PC case
- Keeps your PC clean and improves reliability
- Medium density random cell foam has virtually no effect on airflow
- Contains pre-cut washable and reusable foam filter
- Foam can be removed and washed without opening your PC case
More information
|
| |
Coming soon |
|

|
Price: £4.24 (£4.98 inc. VAT)
- Extremely effective for preventing dust buildup inside your PC case
- Keeps your PC clean and improves reliability
- Medium density random cell foam has virtually no effect on airflow
- Contains pre-cut washable and reusable foam filter
- Foam can be removed and washed without opening your PC case
More information
|
| |
90 in stock |
|

|
Price: £3.39 (£3.98 inc. VAT)
- Extra-soft black silicone gives optimal fan noise reduction
- Compatible with all fans with standard mounting holes
- Easy to fit and remove - no case modifications required
- Excellent value for money and long-lasting (durable and tearproof)
More information
|
| |
190 in stock, 500 due in 20 days |
|

|
Price: £3.39 (£3.98 inc. VAT)
- Extra-soft black silicone gives optimal fan noise reduction
- Compatible with all fans with standard mounting holes
- Easy to fit and remove - no case modifications required
- Excellent value for money and long-lasting (durable and tearproof)
More information
|
| |
500 due in 20 days |
|

|
Price: £3.38 (£3.97 inc. VAT)
- Simple but sturdy design allows airflow wherever needed
- Compatible with any ATX desktop or tower case
- Does not restrict use of AGP/PCI cards
- Easy to install
More information
|
| |
80 in stock |
|

|
Price: £3.23 (£3.80 inc. VAT)
- Help to absorb the fan vibration
- Help to ‘seal’ the small gap between the fan and the casing/enclosure wall
- Compatible with virtually all case cooling fans
- Supplied with screws and silicone washers
- Quick and very easy to fit
More information
|
| |
199 in stock |
|

|
Price: £2.95 (£3.47 inc. VAT)
- Help to absorb the fan vibration
- Help to ‘seal’ the small gap between the fan and the casing/enclosure wall
- Compatible with virtually all case cooling fans
- Supplied with screws and silicone washers
- Quick and very easy to fit
More information
|
| |
528 in stock |
|

|
Price: £2.71 (£3.18 inc. VAT)
- Help to absorb the fan vibration
- Help to ‘seal’ the small gap between the fan and the casing/enclosure wall
- Compatible with virtually all case cooling fans
- Supplied with screws and silicone washers
- Quick and very easy to fit
More information
|
| |
54 in stock |
|

|
Price: £2.60 (£3.06 inc. VAT)
- Allows a 120mm to be installed on an 80 or 92mm opening
- Enables a lower fan speed for a given quantity of airflow
- A lower fan speed means less noise!
More information
|
| |
10 on order |
|

|
Price: £2.54 (£2.98 inc. VAT)
- Extra-soft blue silicone gives optimal fan noise reduction
- Compatible with all fans with standard mounting holes
- Easy to fit and remove - no case modifications required
- Excellent value for money and long-lasting (durable and tearproof)
- Package contains 8 mounts - enough for two fans
More information
|
| |
270 in stock |
|

|
Price: £2.37 (£2.78 inc. VAT)
- Help to absorb the fan vibration
- Help to ‘seal’ the small gap between the fan and the casing/enclosure wall
- Compatible with virtually all case cooling fans
- Supplied with screws and silicone washers
- Quick and very easy to fit
More information
|
| |
240 in stock |
|

|
Price: £2.17 (£2.55 inc. VAT)
- High quality Scythe emblem in the centre of the fan guard
- Protects against injuries caused by rotating fan blades
- Compatible with any 120mm fan
More information
|
| |
8 in stock, 40 more on order |
|

|
Price: £2.12 (£2.49 inc. VAT)
- Reduces fan speed by about 60%
- Simple but effective way to reduce fan noise
- Great value for money
More information
|
| |
1630 in stock |
|

|
Price: £2.12 (£2.49 inc. VAT)
- Reduces fan speed by about 40%
- Simple but effective way to reduce fan noise
- Great value for money
More information
|
| |
514 in stock |
|

|
Price: £2.12 (£2.49 inc. VAT)
- Extends 3-pin fans by 75cm
More information
|
| |
185 in stock, 104 due in 2 weeks |
|

|
Price: £1.73 (£2.03 inc. VAT)
- Allows BR123 to mount extra fans (max. 3)
- Compatible with any 25 mm thick fan
More information
|
| |
16 in stock |
|

|
Price: £1.73 (£2.03 inc. VAT)
- Allows for the Magnetic Fan Filters to be installed onto non-steel chassis
- Designed for the Magnetic Fan Filter Only
- One side adhesive, other side steel strip
More information
|
| |
25 in stock |
|

|
Price: £1.69 (£1.99 inc. VAT)
- Help to absorb the fan vibration
- Help to ‘seal’ the small gap between the fan and the casing/enclosure wall
- Compatible with virtually all case cooling fans
- Supplied with screws and silicone washers
- Quick and very easy to fit
More information
|
| |
353 in stock |
|

|
Price: £1.56 (£1.83 inc. VAT)
- Allows for the Magnetic Fan Filters to be installed onto non-steel chassis
- Designed for the Magnetic Fan Filter Only
- One side adhesive, other side steel strip
More information
|
| |
104 in stock |
|

|
Price: £1.30 (£1.53 inc. VAT)
- Allows for the Magnetic Fan Filters to be installed onto non-steel chassis
- Designed for the Magnetic Fan Filter Only
- One side adhesive, other side steel strip
More information
|
| |
15 in stock |
|

|
Price: £1.12 (£1.32 inc. VAT)
- Allows for the Magnetic Fan Filters to be installed onto non-steel chassis
- Designed for the Magnetic Fan Filter Only
- One side adhesive, other side steel strip
More information
|
| |
Coming soon |
|