Manufacturers

AcoustiFeet Vibration-absorbing Low Profile Feet

	AcoustiFeet black anti-vibration feet, soft [42 in stock]	£1.99 (£2.34 inc VAT)
	AcoustiFeet black anti-vibration feet, very soft [43 in stock]	£1.99 (£2.34 inc VAT)
	AcoustiFeet clear anti-vibration feet, medium [30 in stock]	£1.99 (£2.34 inc VAT)
	AcoustiFeet clear anti-vibration feet, soft [267 in stock]	£1.99 (£2.34 inc VAT)
	AcoustiFeet clear anti-vibration feet, very soft [123 in stock]	£1.99 (£2.34 inc VAT)

ACF3007 - Four soft silicone anti-vibration PC case feet designed to absorb vibrations from PC cases and similar vibrating enclosures.

A great deal of PC case feet are solid plastic, or (at best) very hard rubber and therefore do a good job of transmitting unwanted vibrations from inside a PC via the chassis/case into the desk, floor or shelf on which the system sits. In this situation, where the case is in direct contact with the substrate, the PC can generate annoying noise elsewhere (secondary noise).

Anti-vibration replacement low-profile 'AcoustiFeet' - image showing a set of 4 feet.

Acousti Products have designed a unique set of four self-adhesive soft silicone feet. These case feet are designed to decouple a PC case from the floor or substrate by absorbing vibrational energy, and therefore helping to minimise noise generation caused by vibrations.

A little extreme? Well, yes, perhaps: but even with very quiet PCs it is vibration that becomes the most significant culprit/contributor to noise generation. So these case feet have been developed to try and minimise vibrations in the pursuit of 'ultimate noise reduction'. We hope you enjoy the difference!

Image showing a black foot in position on the base of a computer case.

Image showing a clear foot on the underside of a PC case.

Product features

• Pack Weight: 22g
• Foot Height: 7mm
• Foot Diameter: 29.5mm
• Material: Vibration-Dampening Silicone Rubber
• Non-marking and not sticky!

A simple and economic solution to combat unwanted vibrational noise! - throw away your plastic feet and apply a set of four self-adhesive soft silicone case feet!

Image showing a plan and section of the silicone case foot (ACF3007). The foot design has a rounded edge (that is, the load edge), which helps to absorb vibration in both horizontal and vertical planes.

These feet are low-profile (7mm high), so they won't necessarily be seen, and they are non-marking. The rounded edge is designed specifically to dampen vibration transmission in multiple planes. Different foot softnesses will suit different PC & Server weights - we suggest the following as a rough guide:

• Very Soft (Shore A 15) for SFF Case, Lightweight BTX Case, HTPC Case, Set-top Boxes
• Soft (Shore A 20) for Average BTX Case, Heavier HTPC Cases, Lightweight ATX PC Case
• Medium (Shore A25) for Average ATX PC Case, Lightweight Server Tower
• Firm (Shore A30) for Heavy ATX/EATX PC Cases, Server Tower Cases

[html]

Multiple Applications

Anti-vibration case feet are not just limited to combating PC noise and for vibration control in their application - they may be useful for Inkjet and Laser Printers, HiFi Separates, TVs, Small Form Factor PCs, Home Theatre PCs, and any number of appliances and enclosures that would benefit from vibration adsorption and reduction. Speaker cabinets may also be a useful application for these feet - helping to isolate the speaker cabinet from the surface on which it sits.

If you are a reseller or a system builder we now have OEM AcoustiFeet available in packs of 128, enough for 32 cases! Please contact us for details.

Back to Case Accessories

See also:

Ultra Grade Products