Arctic Silver Ceramique 2,5g, erstklassige Wärmeleitpaste mit hoher Dichte

Ceramique 2,5g, erstklassige Wärmeleitpaste mit hoher Dichte [Eingestellt]

€1,89 (€2,27 inkl. MwSt.)

High-Density ceramic content:

Ceramique uses a high-density layered composite of five unique shapes of thermally conductive aluminium oxide, boron nitride and zinc oxide sub-micron particles to maximize particle-to-particle contact area and thermal transfer. This exclusive combination provides performance exceeding most metal based compounds.

Controlled Triple-Phase Viscosity:

Ceramique does not contain any silicone. The suspension fluid is a proprietary mixture of advanced polysynthetic oils that provide superior performance and long-term stability.

During the system's initial use, the heat from the CPU lowers the viscosity of the compound to enhance the filling of the microscopic valleys and ensure a minimum bond line between the heatsink and the CPU core. Then the compound thickens slightly over the next 100 to 300 hours of use to its final consistency designed for long-term stability.

PLEASE NOTE: This should not be confused with conventional phase change pads that are pre-attached to many heatsinks. Those pads melt each time they get hot then re-solidify when they cool. The viscosity changes that Ceramique goes through are much more subtle and ultimately much more effective.

Excellent Stability:

Ceramique is engineered to not separate, run, migrate, or bleed.

Electrical Insulator:

Ceramique does not contain any metal or other electrically conductive materials. It is a pure electrical insulator, neither electrically conductive nor capacitive.

Performance:

2 to 10 degrees centigrade lower CPU full load core temperatures than standard thermal compounds or thermal pads when measured with a calibrated thermal diode embedded in the CPU core.

Easy Clean Up:

Ceramique can easily be cleaned from CPUs and heatsinks with isopropyl alcohol or any of the cleaners listed in the product instructions.

Innovative Dispenser:

Das Ceramique 2,5 g ist das erste Produkt, das in unserer patentierten Spritze für Wäremeleitpaste angeboten wird. Unsere neue Spritze ist kompakter, leichter zu benutzen und verteilt einen größere Menge ihres Inhalts als normale industrielle oder medizinische Spritzen. Die in der Spritze verbleibende Menge an Wärmeleitpaste ist leicht festzustellen, denn das Ende des Kolbens liegt glatt am Flansch an, wenn die Spritze leer ist.

Kundenbewertungen

Zurück nach oben

Zurück zu Processors and CPU Cooler Accessories