MenuSearch | Country: United States | Currency: USD
Alpine 64 Pro Rev.2 Quiet AMD CPU Cooler
Discontinued
More variations available Show

Arctic Cooling Alpine 64 Pro Rev.2 Quiet AMD CPU Cooler

Alpine 64 Pro offers outstanding price/performance ratio for mainstream users

Enjoy quiet cooling at a reasonable price

The Alpine 64 Pro features a lot of high standard components. The 92mm fan comes with PWM function, which controls the fan speed, and thus, lowers the noise level to a minimum according to the CPU load. The PWM function guarantees sufficient cooling at the lowest noise level possible and saves energy simultaneously. Together with the patented fan case, low noise impeller and the vibration absorption, the Alpine 64 Pro is as quiet as 0.4 Sone at full speed (2,000 rpm).

Apart from the PWM fan, the Alpine 64 Pro also features an optimised heatsink and extremely low resistance thermal compound MX-2 for efficient heat dissipation from the core. The above high quality components offer excellent thermal and noise control management. Without a doubt, the Alpine 64 Pro is one of the most cost-efficient cooler of its class.

Easy installation

With the user-friendly design, the Alpine 64 Pro can be installed within seconds. Remove the standard cooler, place the Alpine 64 Pro on the CPU, lock two lugs with the retention module, and you are ready to enjoy the quietness!

Features

  1. Ultra quiet 92mm PWM fan with low noise impeller
  2. Optimised heatsink efficient heat dissipation
  3. Patented fan holder eliminates the buzzing sounds
  4. Pre-applied MX-2
  5. Easy installation
  6. Compatible with AMD FM1/AM3+/AM3/AM2+/AM2/939/940/754
SpecificationsAlpine 64 Pro Rev.2
CompatibilityAMD FM1/AM3+/AM3/AM2+/AM2
Max TDP90W
Installation MethodAMD - clips, does not require motherboard removal
Dimensions105.3 L x 113.4 W x 84 H mm
Fan size92mm x 25mm
Fan speed500 -2000 RPM (Controlled by PWM)
Air flow36.7CFM / 62.2 m3/h
Maximum Cooling Capacity90 Watts
Weight428g
Warranty72 months
EAN barcode0872767002470
SpecificationsAlpine 64 Pro Rev.2
CompatibilityAMD FM1/AM3+/AM3/AM2+/AM2
Max TDP90W
Installation MethodAMD - clips, does not require motherboard removal
Dimensions105.3 L x 113.4 W x 84 H mm
Fan size92mm x 25mm
Fan speed500 -2000 RPM (Controlled by PWM)
Air flow36.7CFM / 62.2 m3/h
Maximum Cooling Capacity90 Watts
Weight428g
Warranty72 months
EAN barcode0872767002470

Customer Reviews

simple, and acts

,

This cooling is fine. but it was delivered to me as broken. broken up in the plastic part. can treat more attentive during canning.

customer satisfaction in mind, again to send the new product, thank you. I will continue to shop for you that you are honest.

Very unhappy with this...

,

Be careful if you intend to buy this for a socket 754, as it says it’s compatible - but it’s NOT compatible with all of them!

I originally wanted this for a PC Chips M860 I was upgrading - it doesn’t fit. The physical BASE of the HSF would line up, however, the large aluminium frame overhangs the plastic clamp - and my motherboard has capacitors there which get in the way.

I then tried it in an old ASUS board & after much fiddling, (you have to take the clips out completely, not ‘loosen’ the screws as per instructions) I got it to fit.

Only the fan then wouldn’t plug in, as the Asus board (and the PC Chips one) has 3 pin fan headers and this is a 4 pin fan. Again, capacitors in the way prevented me from just forcing it in.

I eventually solved these problems and got it to work - and it’s really not very quiet at all! Better than the stock I replaced, but not by much.

Buying this turned out to be nothing but grief and a waste of money - I wish I’d gone for something else

Quiet PC replied on 12th May 2011

Sorry to hear about the compatibility issues. Please contact our Returns department where we can with offer you a refund or an alternative product.

Product Resources

Top CPU Coolers

Recently Viewed Products